Founders Metals Makes First Discovery at Antino North; Drills 17.22 g/t Au over 3.6 m within 24.6 m of 2.81 g/t Au
- Written by Media Outreach
Highlights First ever Antino North drilling delivers exceptional results from surface in the first drillhole (AN001)
- 24.6 m of 2.81 g/t Au including 3.60 m of 17.22 g/t Au from 1.5 m down hole
- 13.5 m of 0.44 g/t Au from 54.6 m
- First drillhole testing one of twelve gold-bearing structures identified to date at Antino North
-
Surface work continues:
- Over 4,500 auger samples to date in 2026
- Total combined strike length of mapped shear zones on surface is 5.3 km
- Second Antino North drill now turning on previously undrilled kilometre-scale gold auger anomaly (Figure 2)
Antino North Drilling
The new discovery is hosted within a series of approximately 5- to 25-metre-wide shear zones, with geological characteristics consistent with high-grade gold mineralization documented elsewhere on the Antino Gold Project, including at Upper Antino. The reported drillhole tested the first of twelve northwest-trending parallel shears recently mapped over multiple kilometres across the Antino North area, highlighting the significant scale of the mineralizing system. The mapped shear zones are spatially coincident with a large regional-scale fold - a structural setting commonly associated with orogenic gold deposits across the Guiana Shield.
Mineralization is similar in character to the shear- and vein-hosted gold mineralization at Upper Antino, comprising sheared subvertical quartz veins with late brittle deformation overprinting and a sericite-ankerite-tourmaline alteration assemblage.
The Antino North concession has no record of historical diamond drilling. This discovery represents the first drill-tested gold zone within the recently acquired exploration concession, located approximately 20 kilometres southwest of the Upper Antino area - confirming the potential for new mineralized centres across the district-scale Antino land package.
Table 1: Drill Hole Assay Results
| Drillhole | From (m) | To (m) | Interval (m) | Au (g/t) |
| AN001 | 1.50 | 26.10 | 24.60 | 2.81 |
| incl | 1.50 | 5.10 | 3.60 | 17.22 |
| and | 54.60 | 68.10 | 13.50 | 0.44 |
Table 2: Drill Hole Locations
| Hole ID | Easting (m) | Northing (m) | Elevation (m) | Azimuth (°) | Dip (°) | Depth (m) |
| AN001 | 813830.00 | 420168.00 | 149.52 | 110.00 | -70.00 | 260.00 |
ON BEHALF OF THE BOARD OF DIRECTORS,
Per: "Colin Padget" Colin Padget President, Chief Executive Officer, and Director
Contact Information Katie MacKenzie, Vice President, Corporate Development Tel: +1 306 537 8903 | katiem@fdrmetals.com
Cautionary Statement Regarding Forward-Looking Information
This press release contains "forward-looking information" within the meaning of applicable Canadian securities legislation, including statements regarding long term value creation and the Company's prospects. Forward-looking information can generally be identified by words such as "plans", "expects", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates", "believes", or variations indicating that certain actions, events or results "may", "could", "would", "might" or "will" occur or be achieved.
Forward-looking statements are based on management's current expectations and reasonable assumptions but are subject to business, market, and economic risks, uncertainties, and contingencies that may cause actual results to differ materially from those expressed or implied, including: general business and economic uncertainties; exploration results; mining industry risks; and other factors described in the Company's most recent annual management discussion and analysis. Although the Company has attempted to identify important factors that could cause actual results to differ materially, other factors may cause results not to be as anticipated. There can be no assurance that forward-looking information will prove accurate, as actual results and future events could differ materially from those anticipated. Accordingly, readers should not place undue reliance on forward-looking information. The Company does not undertake to update any forward-looking information except in accordance with applicable securities laws. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
All material information on Founders Metals can be found at www.sedarplus.ca.
Quality Assurance and Control
Diamond drill core is HQ diameter through oxide intervals and predominantly NQ diameter in deeper drilling. All samples are half core, split using a diamond saw. Samples were analyzed at FILAB Suriname, a Bureau Veritas Certified Laboratory in Paramaribo, Suriname (a commercial certified laboratory under ISO 9001:2015). Samples are crushed to 75% passing 2.35 mm screen, riffle split (700 g) and pulverized to 85% passing 88 µm. Samples were analyzed using a 50 g fire assay (50 g aliquot) with an Atomic Absorption (AA) finish. For samples that return assay values over 5.0 grams per tonne (g/t), another cut was taken from the original pulp and fire assayed with a gravimetric finish. Founders Metals inserts blanks and certified reference standards in the sample sequence for quality control. External QA-QC checks are performed at ALS Global Laboratories (Geochemistry Division) in Lima, Peru (an ISO/IEC 17025:2017 accredited facility). A secure chain of custody is maintained in transporting and storing of all samples. Drill intervals with visible gold are assayed using metallic screening. Rock chip samples from outcrop/bedrock are selective by nature and may not be representative of the mineralization hosted on the project.
Qualified Persons
The technical content of this news release has been reviewed and approved by Michael Dufresne, M.Sc., P.Geol., P.Geo., an independent qualified person as defined by National Instrument 43-101.
Figure 1: Antino Gold Project Property Map To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7574/290987_7d7ccbdbc42bbaaf_001full.jpg
Figure 2: Antino North Target Plan Map To view an enhanced version of this graphic, please visit: https://images.newsfilecorp.com/files/7574/290987_7d7ccbdbc42bbaaf_002full.jpg
The issuer is solely responsible for the content of this announcement.
Read more https://www.media-outreach.com/news/canada/2026/04/02/458249/

