You’re renovating your home or just thinking of a new look, and that’s amazing. You’ve probably done most of your research on how to buy the right carpet that fits your needs perfectly, but there’s a crucial step that you’re still missing. Knowing how to install your carpet the right way is just as important as choosing the right carpet. If you’ve spent all that time, money and effort in selecting a good piece, why ruin the effort by messing up the installation process?

You need to know about the process and what you need to do to make sure everything goes according to plan. Carpet installation in Sydney especially has been very successful because of how good a job these professionals do.

The guide will not only help you understand the things you need to but also tell you what to expect.

Seek Professional Help

Carpet installation may seem easy, but it’s a skill that needs to be developed and learned over time, so using professionals is a smart choice.

The professionals help build a proper diagram of the rooms that need to be carpeted as their blueprint with the additions of the transitions and placement of seams. And this allows them to be prepared before the installation and use the blueprint as guidance during the process.

Professionals are great at minimizing any irregularities and hiding the seams. The blueprint and their precision will allow them to not run any seams perpendicular to the opening s of a doorway or place them any area that is commonly subjected to any pivoting movement. The transitions, which are the points and differences in height when two different flooring mediums meet will also be easily minimized by matching all the heights of products used in your flooring like for example on a hardwood floor. You might not be great at hiding the seams on your own, especially if this is your first time. Let the professionals take care of it for you.

Remove the Furniture

Your house needs to be prepped up properly before the installation day. You will have to remove all the furniture from the room that needs a new carpet installed in it so if it’s more than one room or even the whole house, plan it way ahead and make sure that all rooms are clear of any furniture before the carpet installation company comes over. You’ll have to make arrangements regarding where you want to store your furniture for the time being. It could be in your garage, or you can also put some in a storage unit.

Remove the old flooring as well at least a day before installation so the floor can be easily cleaned and prepped for the new installation. If you’re removing the old carpets, try to pull only the staples out from the floor and leaving the tack strips in place.

Be prepared for further additions

Many a time professionals installers need to add further subfloors before they install the carpet instead of preparing the already present subfloor. You need to be prepared for it in case that’s what happens. There is also a high possibility that the door might cause hindrance in the installation process. This requires the door to be removed from its hinges and then put back on after the carpet installation process has been completed. Have a carpenter ready in case you need to call him. Being prepared for any situation (mentally and monetarily) saves you from unwanted and unneeded stress.

After the installation, there’s going to be a lot of mess, and junk collected all around, and you’ll probably be too tired to clean the entire house all by yourself. You can either ask ahead if the carpet installation company will take care of the cleaning too and if not, hire separate cleaners to get this added mess off of your hands as well.

Select a Suitable time

Carpet installation takes a lot longer than you think if you ponder over it. First, you have to clean the whole house and store the furniture away, find a suitable storing place, prep the floors for installation and whatnot. In this case, you must choose the right time to do this where you and your family don’t have any serious commitments. Don’t start this process when one of your kids has their exam or don’t start it when it is cold outside, and you are unable to maintain the inside temperature. Prepare a little holiday for your wife and kids for a few days in the spring, or when the weather is nice, so the days they are away, you can get all the work done easily at home.

A lot of tools and chemicals used during the installation can be bad for your kids and pets, so it’s best if they aren’t present.

Be Present On the Installation Day

Clear your schedule completely on the day of installation. You might think that once you hire a team of professionals, you’re free to hang about, but it’s not quite the case. You need to be around in case the workers have any questions for you. In your presence, you’ll be able to oversee everything and make sure the correct carpet is installed in all the areas you want. Stay in touch with your installer at all times in case there’s a delay.

Have a Discussion before Installation

Talk to the person in charge on the day of installation even if you have before. And this allows you to know if the two of you are on the same page and there have been no miscommunications before this. And this will also allow you to ask any questions you need to and make sure everything is as it’s supposed to be.

After Installation Day

The chemicals used in carpet installation can be very pungent and dangerous. Open all the windows to establish good ventilation. Your new carpet will also shed some loose fibers so vacuuming it regularly for four consecutive days will take care of it. Use scissors to trim any areas or tufts that you need to.

Conclusion

There are no downsides to hiring professionals and if you think we’ve convinced you, pick up your phone and contact one right now!